Proportional Temperatur Controller PTC03
Scientific Systems Design

The PTC03 is a temperature control unit for use in conjunction with SSD Brain Slice Chamber BSC1, BSC2 and BSC3. The required temperature is set using the front control panel. Provision is also made to display the temperature from a monitor sensor if this is being used. At a setting of 40 degrees, with an ambient of 20 degrees centigrade full control is reached within 10 minutes when used with our submerged and interface mode slice chambers. The set temperature must exceed ambient by at least 2 degrees centigrade.

Features:

  • Very low noise direct current output
  • High output power for rapid heating
  • Compatible with our range of heating devices
  • Temperature control below ambient with optional Peltier Controller (PC01)
  • Readout Accuracy: +/- 0.1 degrees centigrade
  • Output Type: D.C. proportional control
  • Power Requirements: 110/240V +/- 10% 60/50Hz, 50 W
  • Control Accuracy: 0.5 degrees C below set temp. max. diff.
  • Sensors: Pt 100 platinum resistance grade B.
  • Dimensions / Weight: 27cm W x 27cm D x 9cm H / 4 Kg
  • Control Stability: Max +/- 0.1 deg. C. from control point.
  • Temperature range: 10 to 60 deg. C
  • Output power: 36 Watts max.