EG-401 Microgrinder


Includes of a microscope for observation of pipette contact at grinding plane.

The microscope is mounted on this grinder, which uses a special motor to minimize irregular movements of the grinding plane: confirmation of contact between the pipette and the grinding plane enables grinding to be performed with greater precision. In addition, this model provides stable performance at all revolution speeds - from low for more precision to high for faster grinding. An easily operable coarse and fine movement coaxial manipulator is equipped for vertical operation of the micropipette, which also enables very precise grinding. A protractor is mounted on the pipette holder fixing section, making it easy to set the required grinding angle, and an adaptor is attached for vertical grinding. New water filling and drainage mechanisms are installed to prevent clogging or the accumulation of shavings, making the apparatus as a whole much easier to use.

Accessories included Adaptor for Vertical Grinding,
Diamond Wheel Cleaner, Dedicated Pipette Holder,
Allen Wrench, Spare Lamp, Power Supply Cable
Movement range Pipette manipulator: Approx. 47mm
Microscope: X approx. 7mm, Y30mm, Z approx. 8mm
Magnifications 30x (eyepiece 10x, objective lens 3x)
Glass capillary O.D.1mm - O.D.1.5mm
Power source AC100V(+-5%), 50/60Hz
AC120V(+-5%), 50/60Hz
AC220V(+-5%), 50/60Hz
AC240V(+-5%), 50/60Hz
Power consumption Approx. 50W
Motor speed Approx. 50 - 2,000rpm
Dimensions/Weight W250 x D450 x H400 mm, 6.6 kg