MF-900 Microforge


Multiple functions for making different kinds of microtools.

Reflecting Narishige's long practical experience, the MF-900 offers a wide range of functions for making many different kinds of microtools by processing microneedle tips. An easyto-use manipulator is provided for operating the heater and pipette, and the microscope is operated three-dimensionally with control close to the operator's hand. Separate rotation mechanisms for vertical and horizontal movement allow the pipette to be approached at any angle, while a special device in the heater section can form it into any required shape. As well as conventional scales, a protractor to measure angles is provided on the microscope eyepiece. With the heater turned ON/OFF via a foot switch, and the heater section integrated into the microscope body, all control actions are performed easily and precisely close to the operator's hand.

Accessories included MF-900F Foot Switch, Power Supply Cable,
Allen Wrench, Spare Heater, Spare Lamp,
Silicone Rubber Gasket
Movement range Heater manipulator: X14mm, Y14mm, Z14mm
Pipette manipulator: X12mm, Z28mm
Microscope: X approx. 7mm, Y30mm, Z approx. 8mm
Magnifications 50x/100x (Eyepiece: 10x, Objective lenses: 5x and 10x)
Glass capillary O.D.1mm
Power source AC100V(+-5%), 50/60Hz
AC120V(+-5%), 50/60Hz
AC220V(+-5%), 50/60Hz
AC240V(+-5%), 50/60Hz
Power consumption Approx. 35W
Dimensions/Weight W200 x D350 x H300mm, 6.1kg